What is Pottery Coat™ Base?

Pottery Coat is a non-toxic ceramic glaze that simulates the look of high-fired pottery or stoneware. Although Pottery Coat can be used alone, the best looks are achieved when used as a base coat in combination with Pottery Cascade and a flowing non-toxic glaze, such as Elements.

How do I apply Pottery Coat™ Base?
Apply to properly fired shelf cone 04 bisque. Lightly dampen the bisque with a moistened sponge before painting. This allows better adhesion to the bisque. Shake jar well before application. Apply three even coats with a soft fan brush.

How long does Pottery Coat™ Base need to dry?
The shiny wet look should disappear before adding the second and third coats of Pottery Coat Bases. If the piece has been glazed inside, allow the inside color to dry before starting on the outside colors. Do not force dry with heat, as dry cracking may develop where the layers of product are extremely heavy. If multiple layers of products are applied, allow at least 24 hours of drying time before firing. The piece should no longer be cool to the touch. Make sure the kiln is well ventilated to allow moisture an organic material to escape.

How is Pottery Coat™ Base fired?
A shelf cone 06 is recommended. When high fired, Pottery Coat turns glossy. For surface changes, consult Mayco’s High Fire Guide.

What other combinations can be made?
Not only do Pottery Coat Base and Pottery Cascades work well together with Elements Chunkies. You can get a completely different look using other non-toxic glazes, such as Mayco’s Classic Crackles, Crystalites, Elements and Stroke & Coat. No two pieces will look alike. The shape of the piece, glaze application and firing temperature and kiln load all affect the final glaze surface.

Is Pottery Coat™ Base Food-Safe?
Although Pottery Coat is non-toxic and thus food safe when fired properly according to FDA standards, they are not be practical for food containers due to the porous surface characteristics. To use Pottery Coat on a functional item, you must apply clear glaze to seal the surface. This will darken the color and will show uneven application and brushstrokes.

Pottery Coat Stuccos are a unique, highly-textured product that produces a rough finish similar to cement. These products are available in the same colors as the original Pottery Coat. Think of them as Pottery Coat kicked up a notch. How do I apply Pottery Coat™ Stuccos? Stir Pottery Coat™ Stuccos using a stir stick. Recap the jar and then shake well. Before apply color, wipe cone 04 bisque with a moistened sponge to remove any dust. Apply three even applications using the largest brush to cover the area. Mayco recommends using a soft fan brush (CB-618 or RB-140). After applying three even applications, check the piece to make sure the texture is evenly distributed. Apply texture in areas that may have been left bare. How are Pottery Coat™ Stuccos fired? Always allow piece to dry until you can no longer feel any moisture or the piece no longer feels cold to touch. If there is no glaze on the surface that is placed on the kiln shelf, it is not necessary to stilt the piece when firing. Properly fire to shelf cone 06. Pottery Coat Stuccos can be high fired, but turn glossy. Consult Mayco’s High Fire Guide for surface changes. Are Pottery Coat™ Stuccos Food Safe? Although Pottery Coat™ Stuccos are non-toxic and thus food safe according to FDA standards, they are not practical for food containers due to porous surface characteristics. What other combinations can be use? For best results, use Pottery Coat Stuccos as a base or with other Pottery Coat bases. You may then apply other non-toxic glazes such as Pottery Cascade, Crystalites, Stroke & Coat, Elements or Elements Chunkies for great glaze combinations and techniques. You can apply the other non-toxic products by brushing, spattering, plopping, or sponging for unique effects. Will Pottery Coat™ Stucco scratch furniture? Yes. If piece is to be placed on furniture, you should apply felt tabs to the bottom to protect furniture from the rough texture of the glaze. You can also glaze the bottom of a piece with the corresponding color of Pottery Coat. Can Pottery Coat™ Stucco be used for outdoor use? For pieces designed for outdoor use, apply one coat of AC-301 Repellent Sealer™. Wait twenty-four hours and apply another coat of the sealer.