|
Most ceramists consider Patch-A-Tatch an essential product for ceramics. This quality ceramic cement is used to attach or repair greenware or bisque.
1. Gently scratch crisscross lines on areas to be joined.
2. Using a soft brush, moisten scored areas or broken edges with water. Use the same brush to apply a good coat of Patch-A-Tatch to these areas.
3. Quickly attach or fit the pieces together and hold securely for a few seconds.
4. Brush a little Patch-A-Tatch over the joint and, when set and thoroughly dry, scrape, sand, sponge or otherwise finish, and the piece is ready for decorating or firing.
5. Clean up with water. |
 |
|
|
