|
Español
General Application
Instructions:
(Note: Object to receive decal must be completely clean and
free of any oil or dust.) Immerse decal in lukewarm water
for 20-30 seconds. Slide decal from the backing paper and
position on glazed ware. (If decal doesn't slide off easily
place it face up on a paper towel for a minute.) Be sure
decal is applied face-up; otherwise it will burn completely
off. Remove moisture with a
soft, damp cloth or decal squeegee. Be sure wrinkles and
bubbles are completely removed. Do not rub or press after
decal has dried. Allow to dry 24 hours before firing.
-
Caution: Do not apply on
surfaces that come in contract with food or drink.
-
Keep decals away from small children unless properly
supervised.
-
Lead and Cadmium may be present in some colors.
The firing
ranges given below should only be taken as a general guide
due to differences which may occur in individual kilns. It
is strongly suggested that you do a test-firing before
actually proceeding with your project.
|
Imported China Cone 017-016 |
Ceramic Ware Cone 018-017 |
Red Shades Cone 018 |
|
A higher
temperature is needed to allow a decal to adhere
to the hard surface of imported china.
|
A lower firing
temperature is sufficient for decals on this
ware due to its soft glaze. |
Most shades of
red should not be fired hotter than cone 018
regardless of ware. Overfired red will usually
turn grey. |
|
Pink Shades Cone 017 or hotter |
Cloisonne Style With Gold
Accents Cone 018 |
Liquid Bright Gold Palladium
Platinum Cone 018-017 |
|
Pinks are fired
to a higher temperature to bring out their true
shades. Pink shades looking orange? Then refire
one cone hotter for pleasing results.
|
Designed to be
fired to cone 018 regardless of ware.
|
Fire liquid
metallics on both ceramic ware & imported china
to cone 018. But if gold rubs off easily on
imported china refire to cone 017. |
|
Glass items Cone 022 |
|
|
|
Special colors
allow decals for glass to be fired at a lower
temperature. (Higher temperatures will melt
glass.) |
|
|
|
|
|
|
|
|
|
|
At I Love Painting Ceramics, we are dedicated to your
100% satisfaction. We want to be your one-stop-shop for ceramic
supplies and tips. If you ever have any questions, comments, or
suggestions, please do not hesitate to contact us at any time: info@ilovepaintingceramics.com.
Sincerely,
www.ilovepaintingceramics.com
Est. 1990
| 
